Torque

In terms of screw clamping that is used for the joining of materials necessary to produce products and structures, the importance of torque has been on the rise. In the case of screw, the main product manufactured in our company, its measure and tolerance are strictly standardized in order to fix toolholder or milling-cutter and Insert. The destruction of screws in processing not only causes damage to equipment and tools, but threatens the safety of workers. Therefore, screws to which standardized torque is applied must be used.

	METRIC UNIT SYSTEM			S I UNIT SYSTEM			AMERICAN UNIT SYSTEM
	gf·cm	kgf·cm	kgf·m	mN·m	cN·m(N·cm)	N·m	ozf·in	lbf·in	lbf·ft
1gf·cm	1	0.001	0.00001	0.0981	0.00981	0.0000981	0.0139	0.000368	0.0000723
1kgf·cm	1000	1	0.01	98.1	9.81	0.0981	13.9	0.868	0.723
1kgf·m	100000	100	1	9810	981	9.81	1390	36.8	7.23
1mN·m	10.2	0.0102	0.000102	1	0.1	0.001	0.142	0.885	0.000738
1cN·m	102	0.102	0.00102	10	1	0.01	1.42	0.0385	0.00738
1N·m	10200	10.2	0.102	1000	100	1	142	8.85	0.738
1ozf·in	72.0	0.072	0.00072	7.06	0.706	00.00706	1	0.0625	0.00521
1lbf·in	1150	1.15	0.0115	113	11.3	0.113	16	1	0.083
1lbf·ft	13800	13.8	0.138	1360	136	1.36	192	12	1

Move the scroll to see the table.